National Service Hotline:
+86-372-2595077/2595078/2595088
Purpose
This product is a differential inductive linear displacement sensor with a unique coil structure design, enabling a larger detection range in a smaller size space. The sensor feeds back the inductance change caused by the position change of the movable iron core to the demodulator, which then converts the inductance change into a voltage signal and outputs it. Mainly used in hydraulic closed-loop control systems, its working principle is to convert the displacement of the sensing core contacted or connected by the detected component into a voltage signal that the control system can recognize changes in. It is mainly used for detecting the position of the moving iron of the electromagnet or the main valve core.
Key Parameters
Code | GWEF35-006 |
Working Stroke (mm) | ±3 |
Linear Precision (%) | ≤1.5 |
Repeat Precision (%) | ≤1 |
Input signal | 24VDC±20% |
Onput signal | 3VDC-12VDC |
Protection Grade | IP65 |
Static Oil Pressure (MPa) | 21 |
Curve
Externality &Installation Dimensions
Schematic Circuit Diagram
Commection Defimition | |
Pin NO | Definitign |
1 | Input |
2 | Output |
3 | Common Terminal |
4 | Safety Signal |
Operating Notice
● The sensor adopts sockets that comply with DIN VDE 0627 or other standards.
● This product integrates a modem.
● The working medium of the hydraulic system is mineral oil and phosphate oil.
● The sensor operates continuously.
● The sensor coil can be connected using threaded connections or other connection methods.
● The zero point and gain of the sensor can be adjusted by turning the adjustment screw on the demodulator.
Explanation Of Sample
● If the application is beyond the catalogue,please contact with us.
● Characteristic curve for reference only.
● The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by KAIDI.