Plug type electromagnets come in two specifications: with and without indicator lights, and you can choose according to your needs.

The voltage specifications of the electromagnetic power supply must match the voltage specifications of the electromagnetic body.

The manual push rod of the electromagnet is used for manual control during debugging or emergency situations. When the system backpressure is high and adjustment is difficult, please use a cross screwdriver to slowly push the manual push rod. Impact force should not be used to avoid damaging the surface of the manual push rod and guide inner hole, causing electromagnetic oil leakage or inability to reset.

When using electromagnets in both directions, it is important to ensure that both electromagnets are not energized at the same time to prevent them from burning out.

There should be an overcurrent protection device between the electrical control system and the connection part of the electromagnet to avoid burning the electromagnet and your electronic control components under abnormal conditions.